Remus

Dave Perewitz Tells All

Actually, we've convinced Dave to tell us everything about Custom Motorcycle Painting. With help from Paul Stoll, a trainer for PPG, Dave explains the best way to use the new products and pigments from PPG, how to set up a shop, and how to adjust that new HVLP spray gun.

The best part of the book though is the four, start-to-finish, painting sequences, which include two baggers, one total custom and one flame-painting how-to.

Advanced Custom Motorcycle Painting goes to the printer later in June, and we should have early-release copies ready to ship about 30 days later.



The new Dave Perewitz how-to book should be out by late July.


On the Road Again
Every year there's a book publisher and seller's convention called BEA – Book Expo America – and it's pretty much a must-do deal for our little publishing company. So on May 28th I flew into L.A. and made my way to the depths of downtown, and the hotel located a few blocks from the Convention Center.

In between meetings with our distributor I had a chance to walk the aisles and see how a hundred other publishers, both large and small, design, print and sell their books. The convention center is like a huge think tank and provides an opportunity to learn from other publishers where they print, how they promote, and the best way to sell on the internet.

My evenings were pretty much open and I managed to do a fair amount of time exploring the concrete canyons of LA. Among my discoveries: a bar where I was not only the oldest patron but also the whitest, a neat little Irish bar with a four-piece jazz band, and a lot of people on the sidewalk looking for “just a couple of bucks so I can get something to eat.” I tend to be a soft-touch when it comes to panhandlers, and I just kept a few loose dollar bills in my pocket each time I went out. Yea, maybe they should be looking for a job, but in the meantime it costs so damned much to stay in LA that an extra buck here or there doesn’t even qualify as pocket change anymore.

George Barris
I brought home a few treasures from my trip. The best of which is a real Barris Crest, given to me by George himself. I was lucky enough to spend a few hours with George and his son and daughter, admiring the shop and discussing the success of our recently re-published Kustom Techniques of the '50s books.



The crest was originally meant as a way of telling a real Barris car from an imposter.


At the age of 80, George Barris is still rockin and rolling. Each weekend there's a car show where George is a featured guest and/or judge. And between the shows he's working on some new DVDs and organizing his archives of film. You don't realize how many famous cars George worked on until you look at the size of the archives and start reading the labels on the end of the many, many boxes.



George and family backed by the original Batmobile.


Before leaving L.A. I did a photo shoot for next year's Classic Triumph calendar. With help from Randy Baxter of Baxter Cycle fame, and Greg Hult, owner of some very nice old Turnips, we photographed six bikes. Most of these were done on or near the beach and pier at Seal Beach, a nifty little beach community south of downtown. Greg actually obtained a permit from the city to photograph pretty much anywhere we wanted. I was shocked. Normally we just figure it's better to ask for forgiveness after the fact. Bobby Sullivan called the method, 'click and run.'



Just one of Greg's treasures, parked on the Seal Beach pier.


From Los Angeles I drove north to Monterey and the shop of Bruce Terry. The best part of spending time with Bruce is the fabrication sequences that we always do, but it's really more fun to just walk through the shop looking over his current projects. Like the Ferrari with the new hand-fabricated rear body section. A few of us have talent, and some are blessed with an artistic eye, and then there are people like Bruce who combine both to create large motorized sculptures.



If you’re lucky enough to own a Ferrari and unlucky enough to have an accident, you need Bruce Terry, a metal man of awesome talent.


The next stop on the road trip took me to visit a friend in Livermore, California, which just happens to be right down the street from the Arlen Ness shop in Dublin. Arlen gave me a tour of the shop and then turned me loose on one of the new Victory Baggers. Arlen and I have had a number of discussions regarding the tendency of Harley Baggers to wobble and gyrate at high speeds, and he's fond of saying, “The new Vision is rock solid at 100 miles per hour.” I set out to experience this for myself, but it was nearly 4:00 PM and absolutely no chance of going more than about 30 mph on the nearby freeway. The ride was fun none-the-less and I look forward to a more extended cruise in Sturgis, where you can actually go more than 30 on the freeway, even at 4:00 PM.


The road trip didn’t end there, but I think I’m out of time, so we will save one more significant visit for the next blog.



Yours truly on one of Arlen’s Customized Victory Visions











Dave Perewitz Tells All

The best part of the book though is the four, start-to-finish, painting sequences, which include two baggers, one total custom and one flame-painting how-to.

Advanced Custom Motorcycle Painting goes to the printer later in June, and we should have early-release copies ready to ship about 30 days later.



The new Dave Perewitz how-to book should be out by late July.


On the Road Again
Every year there's a book publisher and seller's convention called BEA – Book Expo America – and it's pretty much a must-do deal for our little publishing company. So on May 28th I flew into L.A. and made my way to the depths of downtown, and the hotel located a few blocks from the Convention Center.

In between meetings with our distributor I had a chance to walk the aisles and see how a hundred other publishers, both large and small, design, print and sell their books. The convention center is like a huge think tank and provides an opportunity to learn from other publishers where they print, how they promote, and the best way to sell on the internet.

My evenings were pretty much open and I managed to do a fair amount of time exploring the concrete canyons of LA. Among my discoveries: a bar where I was not only the oldest patron but also the whitest, a neat little Irish bar with a four-piece jazz band, and a lot of people on the sidewalk looking for “just a couple of bucks so I can get something to eat.” I tend to be a soft-touch when it comes to panhandlers, and I just kept a few loose dollar bills in my pocket each time I went out. Yea, maybe they should be looking for a job, but in the meantime it costs so damned much to stay in LA that an extra buck here or there doesn’t even qualify as pocket change anymore.

George Barris
I brought home a few treasures from my trip. The best of which is a real Barris Crest, given to me by George himself. I was lucky enough to spend a few hours with George and his son and daughter, admiring the shop and discussing the success of our recently re-published Kustom Techniques of the '50s books.



The crest was originally meant as a way of telling a real Barris car from an imposter.


At the age of 80, George Barris is still rockin and rolling. Each weekend there's a car show where George is a featured guest and/or judge. And between the shows he's working on some new DVDs and organizing his archives of film. You don't realize how many famous cars George worked on until you look at the size of the archives and start reading the labels on the end of the many, many boxes.



George and family backed by the original Batmobile.


Before leaving L.A. I did a photo shoot for next year's Classic Triumph calendar. With help from Randy Baxter of Baxter Cycle fame, and Greg Hult, owner of some very nice old Turnips, we photographed six bikes. Most of these were done on or near the beach and pier at Seal Beach, a nifty little beach community south of downtown. Greg actually obtained a permit from the city to photograph pretty much anywhere we wanted. I was shocked. Normally we just figure it's better to ask for forgiveness after the fact. Bobby Sullivan called the method, 'click and run.'



Just one of Greg's treasures, parked on the Seal Beach pier.


From Los Angeles I drove north to Monterey and the shop of Bruce Terry. The best part of spending time with Bruce is the fabrication sequences that we always do, but it's really more fun to just walk through the shop looking over his current projects. Like the Ferrari with the new hand-fabricated rear body section. A few of us have talent, and some are blessed with an artistic eye, and then there are people like Bruce who combine both to create large motorized sculptures.



If you’re lucky enough to own a Ferrari and unlucky enough to have an accident, you need Bruce Terry, a metal man of awesome talent.


The next stop on the road trip took me to visit a friend in Livermore, California, which just happens to be right down the street from the Arlen Ness shop in Dublin. Arlen gave me a tour of the shop and then turned me loose on one of the new Victory Baggers. Arlen and I have had a number of discussions regarding the tendency of Harley Baggers to wobble and gyrate at high speeds, and he's fond of saying, “The new Vision is rock solid at 100 miles per hour.” I set out to experience this for myself, but it was nearly 4:00 PM and absolutely no chance of going more than about 30 mph on the nearby freeway. The ride was fun none-the-less and I look forward to a more extended cruise in Sturgis, where you can actually go more than 30 on the freeway, even at 4:00 PM.


The road trip didn’t end there, but I think I’m out of time, so we will save one more significant visit for the next blog.



Yours truly on one of Arlen’s Customized Victory Visions











Dave Perewitz Tells All

The best part of the book though is the four, start-to-finish, painting sequences, which include two baggers, one total custom and one flame-painting how-to.

Advanced Custom Motorcycle Painting goes to the printer later in June, and we should have early-release copies ready to ship about 30 days later.



The new Dave Perewitz how-to book should be out by late July.


On the Road Again
Every year there's a book publisher and seller's convention called BEA – Book Expo America – and it's pretty much a must-do deal for our little publishing company. So on May 28th I flew into L.A. and made my way to the depths of downtown, and the hotel located a few blocks from the Convention Center.

In between meetings with our distributor I had a chance to walk the aisles and see how a hundred other publishers, both large and small, design, print and sell their books. The convention center is like a huge think tank and provides an opportunity to learn from other publishers where they print, how they promote, and the best way to sell on the internet.

My evenings were pretty much open and I managed to do a fair amount of time exploring the concrete canyons of LA. Among my discoveries: a bar where I was not only the oldest patron but also the whitest, a neat little Irish bar with a four-piece jazz band, and a lot of people on the sidewalk looking for “just a couple of bucks so I can get something to eat.” I tend to be a soft-touch when it comes to panhandlers, and I just kept a few loose dollar bills in my pocket each time I went out. Yea, maybe they should be looking for a job, but in the meantime it costs so damned much to stay in LA that an extra buck here or there doesn’t even qualify as pocket change anymore.

George Barris
I brought home a few treasures from my trip. The best of which is a real Barris Crest, given to me by George himself. I was lucky enough to spend a few hours with George and his son and daughter, admiring the shop and discussing the success of our recently re-published Kustom Techniques of the '50s books.



The crest was originally meant as a way of telling a real Barris car from an imposter.


At the age of 80, George Barris is still rockin and rolling. Each weekend there's a car show where George is a featured guest and/or judge. And between the shows he's working on some new DVDs and organizing his archives of film. You don't realize how many famous cars George worked on until you look at the size of the archives and start reading the labels on the end of the many, many boxes.



George and family backed by the original Batmobile.


Before leaving L.A. I did a photo shoot for next year's Classic Triumph calendar. With help from Randy Baxter of Baxter Cycle fame, and Greg Hult, owner of some very nice old Turnips, we photographed six bikes. Most of these were done on or near the beach and pier at Seal Beach, a nifty little beach community south of downtown. Greg actually obtained a permit from the city to photograph pretty much anywhere we wanted. I was shocked. Normally we just figure it's better to ask for forgiveness after the fact. Bobby Sullivan called the method, 'click and run.'



Just one of Greg's treasures, parked on the Seal Beach pier.


From Los Angeles I drove north to Monterey and the shop of Bruce Terry. The best part of spending time with Bruce is the fabrication sequences that we always do, but it's really more fun to just walk through the shop looking over his current projects. Like the Ferrari with the new hand-fabricated rear body section. A few of us have talent, and some are blessed with an artistic eye, and then there are people like Bruce who combine both to create large motorized sculptures.



If you’re lucky enough to own a Ferrari and unlucky enough to have an accident, you need Bruce Terry, a metal man of awesome talent.


The next stop on the road trip took me to visit a friend in Livermore, California, which just happens to be right down the street from the Arlen Ness shop in Dublin. Arlen gave me a tour of the shop and then turned me loose on one of the new Victory Baggers. Arlen and I have had a number of discussions regarding the tendency of Harley Baggers to wobble and gyrate at high speeds, and he's fond of saying, “The new Vision is rock solid at 100 miles per hour.” I set out to experience this for myself, but it was nearly 4:00 PM and absolutely no chance of going more than about 30 mph on the nearby freeway. The ride was fun none-the-less and I look forward to a more extended cruise in Sturgis, where you can actually go more than 30 on the freeway, even at 4:00 PM.


The road trip didn’t end there, but I think I’m out of time, so we will save one more significant visit for the next blog.



Yours truly on one of Arlen’s Customized Victory Visions











NEW PRODUCTS

New BookNew Book
Our ambitious schedule for this fall includes another Triumph book. This one, Triumph Restoration, focuses on the restoration of the 650cc unit twins produced between 1963 and 1970. The book grew out of conversations with Bobby Sullivan, long-time friend and collector or many, many very nicely restored Triumph Twins. Most of Bobby's bikes are repaired and restored by a certain Mr. Gary Chitwood, and it's Mr. Chitwood who I managed to talk into co-authoring this book.

While some restoration manuals resemble black and white text books, with detailed text descriptions of the changes that occurred year by year, I've taken a different approach with this new book. In place of simple line drawings, we've chosen to give the reader detailed photos of two complete bike assemblies (a 1963 and a 1969) and one complete engine assembly (the 1963), using a wealth of color photographs.

The photographs were taken during an earlier road trip, when Gary, Ryan Bisset and Bobby put together the two bikes and one engine. Though I'm responsible for the photos, the copy and captions are written by the guys who did the actual assemblies.

To cover the differences between the various years, we've decided to provide the reader with left and right side views of all the significant 650cc models from 1959 to 1970. Look for Triumph Restoration sometime this fall.


NEW PRODUCTS

M-C WiringM-C Wiring
Jeff Zielinski is an old friend and the man you see behind the NAMZ booth in Cincinnati or the vendor area in Sturgis. NAMZ is the go-to company for any kind of electrical components you might need while assembling a custom V-Twin motorcycle. From flexible antennas to Deutsche connectors, Jeff has the products you need for that motorcycle project. He’s also a wealth of information when it comes to wiring, most of the wiring diagrams in recent Wolfgang books are compliments of Jeff.
Jeff is so proficient with the wiring diagrams and so good at explaining the best way to put together your own harness, that we’ve convinced him to write a book for us.

Advanced Custom Motorcycle Wiring will debut this summer. Designed both for Harley-Davidson owners who want to customize their bikes, and anyone building a bike from scratch, this book contains wiring diagrams for both the factory bikes and any custom machine that you might want to construct.

Jeff also walks the reader through issues like basic DC electrical theory, charging and starting circuits, whether or not to build your own harness, and how much battery you need to reliably start that 124 inch engine. If wiring is the one job you also farm-out to someone else, pick up a copy of Jeff’s book and do the work yourself. Anyone building a Chopper or Bobber, or just fixing up an old Softail, will find this new book extremely useful.

 Another Doug Thompson beauty, this Chevillac   started as a 1950 Chevy, before Doug added the   Caddy taillights and Imperial grille.  Additional work   includes extended front fenders, chopped top and a   long sculptured line that serves as both a subtleChevillac: Another Doug Thompson beauty,
this Chevillac started as a 1950 Chevy, before
Doug added the Caddy taillights and Imperial
grille. Additional work includes extended front
fenders, chopped top and a long sculptured
line that serves as both a subtlecolor break
and an accent that helps to make the car
look longer and lower than it really is.

 Doug Thompson built the "Hirohata Mercury" in tribute to the original  car. George Barris was so impressed when he saw the car that he gave  Doug a pair of Barris crests for placement on the front fenders. Jack  Walker is the current owner of the Merc.Hirohata Mercury: Doug Thompson built
the "Hirohata Mercury" in tribute to the
original car. George Barris was so impressed
when he saw the car that he gave Doug a
pair of Barris crests for placement on the
front fenders. Jack Walker is the
current owner of the Merc.

Road Trip Number Three
On Monday, the 23rd of February, I pulled out early in the AM driving the trusty Ranger with the trailer in tow, headed south just ahead of an approaching snow storm. The V-6 isn’t entirely happy pulling the trailer, especially in head winds, but in spite of that I managed to make good time between Stillwater and Kansas City. By 4:00 O’clock I was enjoying the company of two old friends, Doug and Nita Thompson, who live in a small town just south of Kansas City, Missouri. During my earlier life as co-publisher and editor of a regional Hot Rod magazine, Midwest Rod & Machine, I often crossed paths with Doug and Nita as they traveled the custom car circuit. A very talented automotive artist, Doug is the man who built the re-creation of the Hirohata Mercury long before the original car was discovered and restored. The famous Merc is only the best known of numerous Doug Thompson creations. Instead of restoring and building old cars, Doug and Nita currently spend their time restoring an old building from the early 1900s, and building interest and support for the county historical museum.

 Gary Chitwood’s T-bird photographed at the Sloss Iron Works in Birmingham.T-bird: Gary Chitwood’s T-bird photographed
at the Sloss Iron Works in Birmingham, Ala.

Saturday morning found me heading south again, this time to Birmingham, Alabama, home to Gary Chitwood, the man who knows more about old Triumph motorcycles than nearly anyone else. Gary is also the man who restores most of the Triumphs owned by Bobby Sullivan, (and co-author of a Triumph restoration book due out from Wolfgang this fall). Birmingham is coincidentally the home of a Sullivan warehouse, managed by none other than Mr. Chitwood. The warehouse is full to the brim with helmets and motorcycle clothing, except for a certain small shop-area at the rear where Gary spends his free time wrenching on old Thunderbirds and Bonnevilles. Gary and I spent Sunday photographing Triumphs for Wolfgang’s next Classic Triumph Calendar.

With my hard drive full of images and my belly still bulging from dinner and drinks the night before, I left on Monday morning bound for Pine Island, Florida. Pine Island is just offshore from Ft. Myers and near the better known Sanibel and Captiva islands. It’s also one of the last pieces of coastal real estate in Florida that hasn’t been buried under concrete. But I digress. My day on the road was pretty uneventful, except for one little unforeseen event, best explained by the photo below.

 The bad news, I blew a tire on the trailer. The good news, the tire store was located at the top of the first exit.Unforeseen Event: The bad news, I blew a
tire on the trailer. The good news, the tire store
was located at the top of the first exit.

Pine Island, home to another Triumph collector, represents another chance to shoot bikes for our 2008 calendar. After arriving at the green isle I met up with Randy Baxter from Baxter Cycle in Iowa, and together we made plans to photograph the nicest of the Triumphs there. During our three days on the island we met a long list of helpful locals, most of whom either are retired or on vacation. There was only one crabby lady who threatened to call the cops because we were apparently trespassing, even though the bike we were photographing sat squarely on public land?

We managed to avoid the gendarmes long enough to do the final photo shoot on Thursday morning. Which meant I had the rest of the day to visit friends who winter nearby, and enjoy a couple of cool ones at Bert’s Bar, a very funky, fun place.

For the next set of photos we moved up to Mt. Dora, located in central Florida, south and west of Daytona. Once again we crossed paths with a long list of interesting folks, including a retired ATF agent and the city administrator. The agent, a motorcycle nut in his own right, owns a very nice piece of property with some ideal settings for old-motorcycle photography. Equally helpful, the city administrator gave us his business card and carte blanche to use the local town square as backdrop for our photos (Randy Baxter called this our “get out of jail free card”).

Saturday morning found me headed north to Daytona Beach. The change in this event can best be described by explaining that I was able to drive down Atlantic Avenue and take my pick of the motels, all of which had Vacancy signs illuminated out front. Not so many years ago you made your reservations months in advance or else settled for some dumpy shit-hole well off the beaten path. How much of the downturn in Daytona’s numbers is the result of an overall softness in the motorcycle market and how much of it is the result of people staying “up north” closer to Destination Daytona is anyone’s guess. I only know that Daytona ain’t like it used to be.

 If you can’t have fun at the Iron Horse, there’s something definitely wrong - with you.Iron Horse Fun: If you can’t have fun at the
Iron Horse, there’s something definitely wrong
- with you.

 Hard to tell if the smoke is from a burn out or the abundant food booths.Smokin': Hard to tell if the smoke is from a
burn out or the abundant food booths.

 It’s all the same as before, just bigger.Daytona: It’s all the same as before, just bigger.

 What can I say?Daytona: What can I say?

Which is not to say that Daytona sucks. In fact, it’s hard not to have fun in Daytona, especially when the “to do” list includes a visit to Mike Corbin’s new facility near Destination Daytona. Considering I was in the neighborhood, it made sense to visit the new Destination and certain nearby waterin’ holes. Many Daytona’s ago I spent the week running a photo booth at the Iron Horse Saloon with my partner Mikey, and I’m pleased to say the place really hasn’t changed much. It’s bigger, but the overall sense of abundant energy and good times is still pretty overpowering. One of the world’s best Biker Bars, the Iron Horse starts with live bands and cold drinks early in the day. By noon on Saturday the band convinced the early revelers to put down their Budweisers long enough to do some dancin’. The Porchdogs, with their unique blend of bluegrass and southern rock an’ roll, helped remind all of us not only how to dance, but why we hauled our motorcycles all the way to Florida for God’s sake. I also made the mandatory stop on Main Street, and like the Iron Horse, it was hard to tell anyone forgot to come to Daytona. The bars, the bike, the people, it looked like Daytona has always looked.

 Looking at Main Street it was hard to spot any missing participants.Main Street: Looking at Main Street it
was hard to spot any missing participants.

 quality time on Main Street.Enjoying: quality time on Main Street.

Unfortunately, my to-do list also included a long list of items to do back at the office (like this blog). So after dinner with author Doug Mitchell on Monday, I left on Tuesday morning, bound for Nashville. This Music City is home not only to the Grand Old Opry, but also Anderson Studios, a silk-screening operation run by Andy and Sherri Anderson. When he’s not designing art for T-shirts, Andy is in the basement painting motorcycles. I don’t believe Andy does it for the money, I believe Andy paints bikes simply because he loves custom motorcycles (sound familiar?).

Wednesday proved to be one of those long driving days. By 10:00 PM when I rolled into the driveway, I swore I’d never drive to Florida again, especially with a trailer. That was over a week ago though and the pain in my back from sitting for thirteen hours is long gone. All I ask for next year is a little more horsepower and a bigger gas tank!